- Joined
- 10 Mar 2019
- Messages
- 64
- Reaction score
- 1
- Country
Hi, can someone advise? We would like to replace a radiator on this small wall that we are studding out using the old radiator pipes (where the plastic loop is shown). The old pipes are currently coming from the old extension where they are laid in screed.
Along with the two CH pipes (2nd and 3rd from left) there is the cold mains (far right) hot water from boiler (second from right) and an unknown pipe (left). The problem is that we dont want to dig up the 2 central heating pipes in the whole extension but the tails as they currently are placed are too far forward from the wall (even with the stud wall).
Can we dig deeper, cut the pipe and add pushfit fittings with an access cover? Where would be the best place to do this and what can we use as our pipe cutter wont fit? What can we use for an access box? The Hep20 boxes are too big
Along with the two CH pipes (2nd and 3rd from left) there is the cold mains (far right) hot water from boiler (second from right) and an unknown pipe (left). The problem is that we dont want to dig up the 2 central heating pipes in the whole extension but the tails as they currently are placed are too far forward from the wall (even with the stud wall).
Can we dig deeper, cut the pipe and add pushfit fittings with an access cover? Where would be the best place to do this and what can we use as our pipe cutter wont fit? What can we use for an access box? The Hep20 boxes are too big