- Joined
- 24 Dec 2006
- Messages
- 3
- Reaction score
- 0
- Country
The first problem I had was that the Washer Dryer would stop during a drying cycle with error E20. This means that it can't drain, and so I cleaned the filter. I then did a hot wash with descaler to clean out the machine, and this completed OK - in particular, it had no difficulty pumping out all the water. However, the machine was still stopping with E20 after about 1 minute whenever I tried a drying cycle. So, after looking at this forum, I tried a reset - holding down two of the buttons, rotating the control to short spin, then rotating it to Economy (or something like that). Now the machine won't do anything. Whenever I select any program, the timer counts down at hugely accelerated rate (about 1 second to decrement the counter by one minute), and reaches zero before it's managed to do anything.
I'd settle for getting it back to the state it was in before I started - just being able to wash but not dry. But, of course, I'd really like to get it sorted out completely. Please help - I have a one month old and a two year old and the smelly washing is piling up!
I'd settle for getting it back to the state it was in before I started - just being able to wash but not dry. But, of course, I'd really like to get it sorted out completely. Please help - I have a one month old and a two year old and the smelly washing is piling up!