Hi. My bathroom ladder-type towel radiator requires regular bleeding. The water level in it drops by about 8-10 inches over a two to three week period. The boiler pressure gauge also drops from approx. 1.5 down to 0.5. No other rads seem to be affected.
The radiator is at the highest point in the house, and is on the same bathroom wall, next to, and about level with, my new 2 years old Worcester Bosch combi. The top of the rad is a few inches higher at the top tube. I have to re-charge the boiler after two or three bleeds. I can’t see any leakage under floor which may cause the problem. R.R
The radiator is at the highest point in the house, and is on the same bathroom wall, next to, and about level with, my new 2 years old Worcester Bosch combi. The top of the rad is a few inches higher at the top tube. I have to re-charge the boiler after two or three bleeds. I can’t see any leakage under floor which may cause the problem. R.R