my alpha cb28 will not reset, i've tried everything i can but only the yellow light flashes and will not fire up, it packed up a few months back and had new diaphragms fitted, any help appreciated
alpha cb28 ... help please
- Thread starter gotthehump
- Start date
Sponsored Links
Would that be neon A or neon B which is flashing?
its the bottom light flashing
How rapid is the flash ie 2/3/4/5 times a second? and is the top neon (A) off altogether
Sponsored Links
maybe 2 ? the other is off completely
At once every 2 secs then that usually indicates a temperature sensor fault.
There is a primary sensor which is checked by the pcb and if out of range will not allow the boiler to fire. This is RGI work as its inside the combustion chamber. I've made this diagnosis on the info you supplied and the manufacturers instructions. I suggest that you should call an engineer and get the boiler checked.
There is a primary sensor which is checked by the pcb and if out of range will not allow the boiler to fire. This is RGI work as its inside the combustion chamber. I've made this diagnosis on the info you supplied and the manufacturers instructions. I suggest that you should call an engineer and get the boiler checked.
ok thanx, will ring landlord
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
