I tripped on one of the speaker cables which has damaged the posts it was plugged into. I suspect that if I can work out how to remove the cover it will be easy to fix - I can get the part from Arcam, and use the other set of posts in the meantime.
However... I removed the two Torx screws from each side, and the two small ones at the back and the cover is not wanting to come off. It feels free at the back and attached at the front of the amp.
I found the maintenance manual online, but it doesn't explain this basic procedure!
Has anyone every done this? If so, your advice will be appreciated.
It's a Diva A65 if that makes a difference.
However... I removed the two Torx screws from each side, and the two small ones at the back and the cover is not wanting to come off. It feels free at the back and attached at the front of the amp.
I found the maintenance manual online, but it doesn't explain this basic procedure!
Has anyone every done this? If so, your advice will be appreciated.
It's a Diva A65 if that makes a difference.