- Joined
- 22 Dec 2007
- Messages
- 3
- Reaction score
- 0
- Country
4 Years Old AWM8121 won't complete washing cycle. At the start of rinse cycle, it will stop, and LED lights in Prewash and Speed 0 will just blink. As per test sequence, this is due to faulty inlet valves. I tested with Cold-Faucet Off with just hot water flowing, got same fault code. I repeated the test, with just Hot-Faucett Off, same result. At the prewash stage of both tests, I can see water coming in at the back of the dispenser. Could this be a program error ? Or should I replace the inlet valves?