Hi All
My Bathroom as been re-furb'd and I thought id leave the bath panel off just incase anything leaked. Now im 100% all is good under there I went to fit the panel and there is about 1/4 inch gap underneath it. Bath has been set too high and lowering it is not an option. It wouldn't be a problem if the panel was straight edged but its a P shaped bath. Ive heard of these pvc moulded seals which you can cover the gap with then silicone over.
Has anyone heard of these and where I might be able to buy one.
Many Thanks
My Bathroom as been re-furb'd and I thought id leave the bath panel off just incase anything leaked. Now im 100% all is good under there I went to fit the panel and there is about 1/4 inch gap underneath it. Bath has been set too high and lowering it is not an option. It wouldn't be a problem if the panel was straight edged but its a P shaped bath. Ive heard of these pvc moulded seals which you can cover the gap with then silicone over.
Has anyone heard of these and where I might be able to buy one.
Many Thanks