Hi all Im about to start my own bathroom install and tbh Ive never done plumbing/bathroom diy before.
I have been reading up as much as I can, but can anyone give me any tips/advice?
I have to change everything .....all new pipework and electrics, replasterboarding roof and wall to create enough depth for my concealed triple valve shower unit.Having a corian floating shelf made up for counter top basin, and fitting wall mounted flush plate sink taps
Been reading up on installing pipe work, soldering and fitting into walls butis there anything important i should know?
ie found out I must have a min 18+ degree slope over a meter on the toilet waste and must coat all pipes that are being consealed into the wall.
also not to use PVA on the walls or plaster before tiling.
any other tips?
I have been reading up as much as I can, but can anyone give me any tips/advice?
I have to change everything .....all new pipework and electrics, replasterboarding roof and wall to create enough depth for my concealed triple valve shower unit.Having a corian floating shelf made up for counter top basin, and fitting wall mounted flush plate sink taps
Been reading up on installing pipe work, soldering and fitting into walls butis there anything important i should know?
ie found out I must have a min 18+ degree slope over a meter on the toilet waste and must coat all pipes that are being consealed into the wall.
also not to use PVA on the walls or plaster before tiling.
any other tips?