Hi
I'm in the process of fitting a melamine covered worktop in the bathroom.
Its cut to length and there is some damage to the front contour at one end (caused by me I'm pretty sure when it was bashed on the floor)
There is only the smallest indentation which would be hardly noticeable but the melamine has cracked lengthwise. There are two cracks on the contour starting from the edge and about 1/2" to 3/4" in length.
My question is "how to hide the cracks" if this is possible. I'm sure someones done this before.
If you can help I would be grateful for advice before I have to tell the wife.
In addition, after cutting the worktop and sealing the edge with pda. What is the best adhesive to glue the melamine edgeing in place.
I'm in the process of fitting a melamine covered worktop in the bathroom.
Its cut to length and there is some damage to the front contour at one end (caused by me I'm pretty sure when it was bashed on the floor)
There is only the smallest indentation which would be hardly noticeable but the melamine has cracked lengthwise. There are two cracks on the contour starting from the edge and about 1/2" to 3/4" in length.
My question is "how to hide the cracks" if this is possible. I'm sure someones done this before.
If you can help I would be grateful for advice before I have to tell the wife.
In addition, after cutting the worktop and sealing the edge with pda. What is the best adhesive to glue the melamine edgeing in place.