hi all,
i have a fault on my Bax1 105e. the 50 LED is flashing on and off and we have no hot water or heating. if you turn the boiler off for ten minutes then back on the stystem works ok for 5/10 minutes then the LED starts flashing again. it indicates a fan or flue fault but the fan runs ok and the flue is clear.
i read another post where a guy had the same fault and he was advised that it was a common fault on the baxi 105e and would be the pcb. i ordered a new one and fitted it but the boiler wouldnt even ignite and the 30 and 40 leds flashed on and off. the new pcb i fitted had superceded the original one in the boiler and had slightly different Earth terminals but the rest were the same.
dont know what else to try. could it be that the pcb supplied was an out of box failure? when i put the original one back into the boiler the 50 LED started to flash again.
Help, please!!!!
i have a fault on my Bax1 105e. the 50 LED is flashing on and off and we have no hot water or heating. if you turn the boiler off for ten minutes then back on the stystem works ok for 5/10 minutes then the LED starts flashing again. it indicates a fan or flue fault but the fan runs ok and the flue is clear.
i read another post where a guy had the same fault and he was advised that it was a common fault on the baxi 105e and would be the pcb. i ordered a new one and fitted it but the boiler wouldnt even ignite and the 30 and 40 leds flashed on and off. the new pcb i fitted had superceded the original one in the boiler and had slightly different Earth terminals but the rest were the same.
dont know what else to try. could it be that the pcb supplied was an out of box failure? when i put the original one back into the boiler the 50 LED started to flash again.
Help, please!!!!