I'm hoping the forum can help me with my predicament.
I have the dreaded issue of hot water passing into the central heating and after googling the problem find its common on the baxi 105e.
I have checked the diaphragm which appears to be intact and cleaned the pin that pushes the microswitch as this had deposits on it and was sticking a bit.
Ive been quoted £250 to have the valve replaced but find this a bit steep to swallow.
What are my options. I'd class myself as pretty competent when it comes to diy but my wife is nervous with me messing with the boiler.
Any ideas would be most appreciated even if thats the details of a decent boiler engineer that covers nottingham.
I have the dreaded issue of hot water passing into the central heating and after googling the problem find its common on the baxi 105e.
I have checked the diaphragm which appears to be intact and cleaned the pin that pushes the microswitch as this had deposits on it and was sticking a bit.
Ive been quoted £250 to have the valve replaced but find this a bit steep to swallow.
What are my options. I'd class myself as pretty competent when it comes to diy but my wife is nervous with me messing with the boiler.
Any ideas would be most appreciated even if thats the details of a decent boiler engineer that covers nottingham.