baxi 105e

[nufc67]

hi all this is my first post on here, been lookin on here for i while i just need help with my boiler a baxi 105e

when i switch the conrol knob on the left hand side of the boiler to c/h and h/w the boiler fires up as normal but the tap l.e.d on the bottom flashes then wen i open the tap it switchs over to h/w and the tap needs to be dribbling for me to have any red hot water, ive tried reseting it which works but then starts to do it agian? any one experianced this? any help would be grateful?

 

[gas4you]

Are you sure you haven't got a 105e instant?

The flashing tap led would be HW pre-heat if that was the case.

 

[Agile]

With the boiler cold measure the resistance of the two sensors.

Or did you forget to tell us its an instant?

Tony

 

[andy456]

how can you tell if the boiler is an 105e or a 105he

 

[namsag]

The HE has a plastic pipe coming out the bottom on the front right hand side.
if you mean how can you tell an instant then the hot water knob on front says preheat beside it

 

[nufc67]

yep its an instant thanks very much so it just blinks wen its pre heating the water? thanks again