Hi Guys, i currently have a Baxi Bermuda 552 Back boiler with a radiant fire front. The boiler needs changing because when i had it serviced it was noticed that the part where the flame is contained had some of the holes rusty and falling apart. I have been offered a 57/4M back boiler with a GF3 fire front which is 8 years old.
1)Is the boiler quite easy to change (by a Corgi fitter)
2)How much would it cost to remove the old boiler and replace it with the other one.
3)Can i just replace the part of the 552 boiler that is corroded and is this difficult and costly. (This part is half round i think with many hole in it and when the boiler fires up you can see the flames in it). Sorry if my description is a bit vague.
Cheers!
1)Is the boiler quite easy to change (by a Corgi fitter)
2)How much would it cost to remove the old boiler and replace it with the other one.
3)Can i just replace the part of the 552 boiler that is corroded and is this difficult and costly. (This part is half round i think with many hole in it and when the boiler fires up you can see the flames in it). Sorry if my description is a bit vague.
Cheers!