Christmas day of all days the boiler failed and showed an error 'E160'. According to the manual an error associated with the fan or pcb.... After switching the boiler off, then on again the thing works only to fail intermittantly throughout the day. This leads me to believe the problem might be with the pcb....so my question is, I can get a new pcb for £65, much cheaper than a tradesman would charge, then it is only 4 mounting screws and 4 or 5 cable connections to the board. Is this something I SHOULD be doing myself, or are there pitfalls/dangers.
Any help or advise greatfully accepted,
many thanks and happy new year,
Jason.
Any help or advise greatfully accepted,
many thanks and happy new year,
Jason.