Hi
we hit a problem this week with our gates where they stopped working via intercom and code, and would only work via the key fob.
Had an engineer out today who said all the wiring was wrong (despite it previously working fine) and after rewiring it correctly only 1 of the gates works. The other remains closed. The engineer says this motor has failed.
In the attached, it shows the wiring as it is now. Does it look correct? In block 3, I can see that #16 does not link to #13 (COM) while #14/15/17 do. Should it?
Any info appreciated before we shell out on new motors.
Thanks
we hit a problem this week with our gates where they stopped working via intercom and code, and would only work via the key fob.
Had an engineer out today who said all the wiring was wrong (despite it previously working fine) and after rewiring it correctly only 1 of the gates works. The other remains closed. The engineer says this motor has failed.
In the attached, it shows the wiring as it is now. Does it look correct? In block 3, I can see that #16 does not link to #13 (COM) while #14/15/17 do. Should it?
Any info appreciated before we shell out on new motors.
Thanks