BG

[EdCurrent]

Hello All.
Anyone out there using BG materials ?
Consumer unit internal screws and lightswitch terminals seem poor. Don't usually use them but builder supplied materials.
Regards
Ed.
Hello to old friends.
ps BAS Where's me core drill ???

 

[Taylortwocities]

Not used the consumer unit, and would not. I only go for Hager or MEM.

BG sockets and switches seem OK. The plate screws on the light switches are too short inless the back box is exactly flush with the wall and they'll never reach for dry lining boxes, so load up with some extra 35mm ones!

 

[PrenticeBoyofDerry]

I think for a budget range the CUs are okay and quite adaptable.