Hi
I have a problem with a potterton performa 28 combi that will not ignite. It was performing fine untill the system was drained to refit a radiator (loose brackets and kinked pipe) now fixed.
The system has been filled via loop and is at 1 bar, when heating or hot water selected the fan and pump can be heard running but after approx 10 seconds a flashing LED comes on indicating a fault on the fan or flue, the system makes no attempt to fire up.
All rads have been bled, there seems to be no link to the work carried out and the problem, the system was down for approx 4 hours for the initial repair before attempting to switch back on.
Any info would be greatly appreciated.
I have a problem with a potterton performa 28 combi that will not ignite. It was performing fine untill the system was drained to refit a radiator (loose brackets and kinked pipe) now fixed.
The system has been filled via loop and is at 1 bar, when heating or hot water selected the fan and pump can be heard running but after approx 10 seconds a flashing LED comes on indicating a fault on the fan or flue, the system makes no attempt to fire up.
All rads have been bled, there seems to be no link to the work carried out and the problem, the system was down for approx 4 hours for the initial repair before attempting to switch back on.
Any info would be greatly appreciated.