Hi guys,
i'm new to the forum, wonder if someone can help...
I've got a Bosch Classixx 1200 Express [E-NR WF02467GB/15] [FD 8511 606713]
I use the machine maybe 2/3 times a week and a few months ago halfway through a standard 30/40 degree mixed wash the RCD in my house fuse box tripped.
Upon breaker reset the machine came back on and attempted to continue it's cycle. The machine ran for maybe a few minutes and tripped the breaker out again.
It did this for a few days and we took the back off to have a look at anything "obvious".
Unfortunately the internals are sealed into separate units and we couldn't really open them up without stripping the machine apart. We managed to get the unit to perform a full spin cycle, the motor ran perfectly and reached full rpm. We also got a 1minute drain cycle to run fine aswell.
For some reason it started working again for a few months then last night it tripped the breaker out again. Upon reset, the unit resumed it's cycle, the initial relay (in the main front panel unit) clicked in and the cycle continued but the second the next relay clicked in the breaker tripped and everytime we reset the breaker tripped again.
I have no problem with car electrics but hate household electrics and to be honest i'm not really sure where to start.
Can anyone help?
Thanks a lot guys.
i'm new to the forum, wonder if someone can help...
I've got a Bosch Classixx 1200 Express [E-NR WF02467GB/15] [FD 8511 606713]
I use the machine maybe 2/3 times a week and a few months ago halfway through a standard 30/40 degree mixed wash the RCD in my house fuse box tripped.
Upon breaker reset the machine came back on and attempted to continue it's cycle. The machine ran for maybe a few minutes and tripped the breaker out again.
It did this for a few days and we took the back off to have a look at anything "obvious".
Unfortunately the internals are sealed into separate units and we couldn't really open them up without stripping the machine apart. We managed to get the unit to perform a full spin cycle, the motor ran perfectly and reached full rpm. We also got a 1minute drain cycle to run fine aswell.
For some reason it started working again for a few months then last night it tripped the breaker out again. Upon reset, the unit resumed it's cycle, the initial relay (in the main front panel unit) clicked in and the cycle continued but the second the next relay clicked in the breaker tripped and everytime we reset the breaker tripped again.
I have no problem with car electrics but hate household electrics and to be honest i'm not really sure where to start.
Can anyone help?
Thanks a lot guys.