- Joined
- 29 Jul 2016
- Messages
- 3
- Reaction score
- 0
- Country
Hi all, I have a Bosch SGS45E08GB Dishwasher that has a little problem.
It wont start its washing cycle at the moment because the washer is filling and pumping water at the same time. Also you can open the door whilst this is all going on and watch it doing this cycle.
I think I sorted this problem out many years ago by changing the door switch but just wanted to clarify with you guys first if this door switch could be the culprit?
Would anyone know if I have to change the whole part or can I just change the micro switch?
Thanks in advance
It wont start its washing cycle at the moment because the washer is filling and pumping water at the same time. Also you can open the door whilst this is all going on and watch it doing this cycle.
I think I sorted this problem out many years ago by changing the door switch but just wanted to clarify with you guys first if this door switch could be the culprit?
Would anyone know if I have to change the whole part or can I just change the micro switch?
Thanks in advance
Last edited: