Do you mean "WFL" 2060?
Outside the test program only 3 error codes are visible to the end user...door open, drain problem, & water supply issue. If the machine stops with the active light flashing it signals a water supply issue. How many inlet valves are there on your machine...one or two?
By definition when the program stops & the active light flashes it suggests a restricted/blocked cold fill hose, closed tap, or one of the dual inlet valves isn't functioning. However sometimes error codes can be misleading. I would check the drain pump for possible obstructions & the motor brushes for excessive wear before rushing out to buy a new valve at around £30. BTW; is the full E-number WFL2060GB/04? (look on the door sticker).
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local