British Gas - Model UP2 programmer

Discussion in 'Plumbing and Central Heating' started by nichy, 24 Jan 2011.

  1. nichy

    Joined:
    24 Jan 2011
    Messages:
    2
    Thanks Received:
    0
    Location:
    Surrey
    Country:
    United Kingdom
    Recently moved house no instructions for central heating system but it is all working very well. Yesterday however the display on my dual channel programmer model UP2 has 'disappeared'. Doesn't show time or arrows to change Off, Timed, Once, On and I now if I try and press the select button to change the HW or CH nothing happens so they are both permanently on (red light tells me). The CH is still working perfectly and I turn the heat up and down via the thermostat in the hallway. Can anyone give me any advise? (For info we have a immersion heater for the hot water tank.)
     
  2. 45yearsagasman

    Joined:
    14 Mar 2010
    Messages:
    5,304
    Thanks Received:
    908
    Location:
    Norfolk
    Country:
    United Kingdom
    I think you reset this programmer to default by pressing and holding the
    SET and the PLUS + buttons together for approx 5 secs.If that fails then I guess its a new programmer.
    PS The instructions for the Drayton equivalent of this prog can be down loaded.
     
  3. nichy

    Joined:
    24 Jan 2011
    Messages:
    2
    Thanks Received:
    0
    Location:
    Surrey
    Country:
    United Kingdom
    Will certainly give it a go. thank you so much for replying.
     

Share This Page