I am trying to connect the following to a fused board which will then lead back to a new connection off an unused fuse off my consumer unit:
2 x Air con unit (1400W, 6.7A)
1 x Electric heater (1500W, 15A)
1 x Security light (15W, 5A)
2 x Fluorescent lights (??W, 5A)
1 x Double socket
I would like to wire up the fused board and the above and get an electrician to check it and do the final connection to the consumer unit. I am having trouble calculating what the start up load would be for the above and hence the cable size back to the consumer unit. The cable run is about 5 metres. Can anyone help?
2 x Air con unit (1400W, 6.7A)
1 x Electric heater (1500W, 15A)
1 x Security light (15W, 5A)
2 x Fluorescent lights (??W, 5A)
1 x Double socket
I would like to wire up the fused board and the above and get an electrician to check it and do the final connection to the consumer unit. I am having trouble calculating what the start up load would be for the above and hence the cable size back to the consumer unit. The cable run is about 5 metres. Can anyone help?