I've cut out the old cast pan connector for my upstairs toilet. Its a 90degree 110mm connector. The problem is, that I can't get the new plastic 110mm connector in the cast soil pipe joiner as theres about 2 inches left in the joint. The plastic connector is an off the shelf job from B&Q.
I've measured the hole with the 2 inches of cast left in there and its 90mm. Is there anywhere I can get some sort of an adaptor that will go 90mm from the cast soil pipe, that will then fit into a 110mm that goes onto the plastic pan connecter?
I hope that makes sense?
I've measured the hole with the 2 inches of cast left in there and its 90mm. Is there anywhere I can get some sort of an adaptor that will go 90mm from the cast soil pipe, that will then fit into a 110mm that goes onto the plastic pan connecter?
I hope that makes sense?