I'm replacing the ceiling rose in my hall, but the existing wiring seems a bit odd!
There is nothing connected to the Neutral terminal block.
The blue flex wire is connected to the middle block alongwith 2 black wires.
The brown flex wire is connected to the Live end block alongwith 1 red wire (which I'm assuming is the switch).
The 3 earth wires all go to the earth terminal.
There are 3 red wires which are just taped up and not connected to anything?
Should I replicate this with the new rose or connect the wires as would be expected, i.e. putting the blue and black wires in the neutral block and the 3 red wires in the central block?
There is nothing connected to the Neutral terminal block.
The blue flex wire is connected to the middle block alongwith 2 black wires.
The brown flex wire is connected to the Live end block alongwith 1 red wire (which I'm assuming is the switch).
The 3 earth wires all go to the earth terminal.
There are 3 red wires which are just taped up and not connected to anything?
Should I replicate this with the new rose or connect the wires as would be expected, i.e. putting the blue and black wires in the neutral block and the 3 red wires in the central block?