Central Heating Advice

Joined
6 Oct 2010
Messages
41
Reaction score
0
Location
Lancashire
Country
United Kingdom
HI!
I have an old Vaillant VCW 242 EH in my house running 6 radiators, 3 up and 3 down.
I have just got around to controlling the system with a thermostat.
I am finding that with the boiler set on 5 (about half way position) the boiler doesn't fire for very long at all before switching off again. One of the radiators upstairs is off and one nearly off on a TRV. I notice that the outlet pipe from the boiler soon gets very hot and the inlet still cold. Could there be some kind of circulation problem???? The pump seems to go fine. I have just taken the end screw out today and looks to be spinning like a good one. Could there be something else?? Bunged radiators? Valves not working properly??? If I bang the temp switch on the boiler up to max it all seems to work fine but a bit over the top for this time of year!!!
Many thanks!
Phil :D
 
Sponsored Links
Try turning the TRVs up to maximum and turn up the room thermostat to get the heating running full blast. If the return pipes of all the radiators get quite hot (no more than 11°C cooler than the feed pipe), then your circulation is probably fine.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top