Hi,
Help please,
Since I have had a water meter fitted the CH header tank continues to fill with water until it overfows. Water feels warm.
Fitted a new ball valve etc, seemed OK for a short time - a few weeks but now back.
Tried to turn down the water pressure at the meter but no change.
The ball valve seems dry on inspection so completely perplexed.
Seems to produce watr out of thin air.
One last thing of note the pipework seems a bit noisier than usual though this started before the water meter was fitted and no problems then.
Have to remove water manually from HT to prevent overflow, done this 3 time now.
Any advice very much appreciated.
(Fully pumped system with hot water tank).
JW
Help please,
Since I have had a water meter fitted the CH header tank continues to fill with water until it overfows. Water feels warm.
Fitted a new ball valve etc, seemed OK for a short time - a few weeks but now back.
Tried to turn down the water pressure at the meter but no change.
The ball valve seems dry on inspection so completely perplexed.
Seems to produce watr out of thin air.
One last thing of note the pipework seems a bit noisier than usual though this started before the water meter was fitted and no problems then.
Have to remove water manually from HT to prevent overflow, done this 3 time now.
Any advice very much appreciated.
(Fully pumped system with hot water tank).
JW