so the programmer & wires were burnt in a fire & all i have is some cables & a new programmer. i have traced the cables as far as i can without lifting laminate floors, the picture of the boiler doesnt necacerily represent seperate connections, just the wires dissappear under the floor towards the boiler, the top of the picture is the programmer back plate, i posted yesterday not realising that 1 valve was an actuator. the actuator is on the top circ pipe into the cylinder, the motorised valve is on the heating pipe just after the t to the circ pipe.
i need to know which wires go into which number sockets on the programmer.
if you can help gplease go from left to righ
ie:
L=1
E=Earth <---- think this is right
N=N <--- think this is right
L=3
N=4
L=2
E=3
i need to know which wires go into which number sockets on the programmer.
if you can help gplease go from left to righ
ie:
L=1
E=Earth <---- think this is right
N=N <--- think this is right
L=3
N=4
L=2
E=3