- Joined
- 3 Oct 2021
- Messages
- 10
- Reaction score
- 0
- Country
Hi, I've just moved to a new house and have a lot of Hive equipment that I want to use from my old house (TRVs mainly). The new house has Nest.
I was hoping it would be a simple job of swapping over the receiver and isolating the T1 and T2 power (as Hive thermostat is battery).
The Hive diagrams look simple enough for the water (on/off) and heating (on/off), however I don't understand the existing Nest wiring. Apart from L and N, only two wires come up from the wiring box and the other two appear bridged. How do I convert this onto the Hive terminals? I've attached a photo of the existing Nest wiring.
Thank you for your help.
Andrew
I was hoping it would be a simple job of swapping over the receiver and isolating the T1 and T2 power (as Hive thermostat is battery).
The Hive diagrams look simple enough for the water (on/off) and heating (on/off), however I don't understand the existing Nest wiring. Apart from L and N, only two wires come up from the wiring box and the other two appear bridged. How do I convert this onto the Hive terminals? I've attached a photo of the existing Nest wiring.
Thank you for your help.
Andrew