Close Coupled WC - I need to change the syphon as the system is difficult to flush. How do I go about this. I inderstand the whole cistern needs to be removed from the wall.
The water inlet pipe is a copper to plastic fitting and seems to have two nuts, do I unscrew the plastic side or the metal or both.
When I unscrew the two retaining screws holding the cistern to the wall will I need to support it or will the bowl take the weight.
Any help welcome
Thanks
The water inlet pipe is a copper to plastic fitting and seems to have two nuts, do I unscrew the plastic side or the metal or both.
When I unscrew the two retaining screws holding the cistern to the wall will I need to support it or will the bowl take the weight.
Any help welcome
Thanks