Hi all,
firstly you have no idea how helpful this whole forum is, only wish i could offer advice (only specialised subject is audio visual)
here we go again another plea for help.
I have a bathroom with a basin ( hot and cold)
a bath (hot and cold)
a mixer shower above the bath
i have noticed that the cold tap on the bath was getting stiffer and the water was not outputting very good pressure. the basin cold supply was fine.
now the cold water from the bath has stopped altogether and the shower is only outputting hot.
the cold from the basin is still fine.
on looking through the forum i have concluded that the cold pipe is blocked. Is there a way to check this?
Is there anything else it could be?
anything information would be gratefully received
thank you in advance
Andy
firstly you have no idea how helpful this whole forum is, only wish i could offer advice (only specialised subject is audio visual)
here we go again another plea for help.
I have a bathroom with a basin ( hot and cold)
a bath (hot and cold)
a mixer shower above the bath
i have noticed that the cold tap on the bath was getting stiffer and the water was not outputting very good pressure. the basin cold supply was fine.
now the cold water from the bath has stopped altogether and the shower is only outputting hot.
the cold from the basin is still fine.
on looking through the forum i have concluded that the cold pipe is blocked. Is there a way to check this?
Is there anything else it could be?
anything information would be gratefully received
thank you in advance
Andy