I have a combi bolier, and up until now I've had no problems with CH / Hot water.
Recently I attempted to remove a radiator from a wall whilst decorating. I aborted this attempt when the water flow seemed too much (loosened the lockshield valve end).
Since then no radiators warm up at all and there is no hot water. I have heard some banging when turning taps off quickly. Also, the pressure in the combi bolier reads 0 on the meter!!
What should I do?
Thanks!
Recently I attempted to remove a radiator from a wall whilst decorating. I aborted this attempt when the water flow seemed too much (loosened the lockshield valve end).
Since then no radiators warm up at all and there is no hot water. I have heard some banging when turning taps off quickly. Also, the pressure in the combi bolier reads 0 on the meter!!
What should I do?
Thanks!