- Joined
- 29 Sep 2023
- Messages
- 1
- Reaction score
- 0
- Country
Hello
This is a large system with 64 radiators fed by two biomass boilers via heat exchangers
Looking to replace a radiator in one of the bathrooms presently
I note that there is an inlet and outlet as would be expected
However, the two pipes are connected by a shunt pipe without any obvious valve in between (ie the shunt is running with flow parallel to the radiator)
Would value gaining an understanding of this
Thanks
Nick
This is a large system with 64 radiators fed by two biomass boilers via heat exchangers
Looking to replace a radiator in one of the bathrooms presently
I note that there is an inlet and outlet as would be expected
However, the two pipes are connected by a shunt pipe without any obvious valve in between (ie the shunt is running with flow parallel to the radiator)
Would value gaining an understanding of this
Thanks
Nick