We are having the kitchen done, and were going to fit an electric range cooker, but SWMBO has had 2nd thoughts and now thinks 2 single ovens side by side and a seperate induction hob is a better idea.
We currently have 10mm2 cable from 45A cartridge fuse at CU to a cooker point and 10mm2 to the cooker. If we had stayed with the range, then this would probably have had to be uprated to 16mm2 anyway, but how is the best way to connect the seperate ovens and hob?
The induction hob has a total connected load of 10.8KW
Oven 1 has has a total connected load of 3.8KW
Oven 2 has has a total connected load of 3.8KW
Thanks
We currently have 10mm2 cable from 45A cartridge fuse at CU to a cooker point and 10mm2 to the cooker. If we had stayed with the range, then this would probably have had to be uprated to 16mm2 anyway, but how is the best way to connect the seperate ovens and hob?
The induction hob has a total connected load of 10.8KW
Oven 1 has has a total connected load of 3.8KW
Oven 2 has has a total connected load of 3.8KW
Thanks
