- Joined
- 6 Feb 2020
- Messages
- 2
- Reaction score
- 0
- Country
Hello
I have a cooker hood that came with a fitted 13 amp plug. Unfortunately there is no 13 amp socket near to the hood, however there is a FCU unit that has an off/on switch. So how should I connect the hood to the power supply? Do I cut the 13 amp plug off and wire it into the load side of the FCU or can I remove the FCU and replace it with a single 13 amp socket.
Any advice/help would be appreciated
Stewart
I have a cooker hood that came with a fitted 13 amp plug. Unfortunately there is no 13 amp socket near to the hood, however there is a FCU unit that has an off/on switch. So how should I connect the hood to the power supply? Do I cut the 13 amp plug off and wire it into the load side of the FCU or can I remove the FCU and replace it with a single 13 amp socket.
Any advice/help would be appreciated
Stewart