I wouldn’t normally hijack another post but the question is pretty much the same as mine.
I’m looking to replace the same Danfoss RMT230 with either the Honywell CM907 or Heatmiser PRT-TS, my wiring is the same.
4 = Blue Wire (Neutral)
1 = Brown Wire (COM)
2 = Black Wire (ON)
3 = Empty terminal (OFF)
The only difference is that I have a Glo Worm 40FF non-condensing boiler, will these thermostats still be compatible using the same 3 to 2 wire principle- isolating neutral?
Thanks
Leon
I’m looking to replace the same Danfoss RMT230 with either the Honywell CM907 or Heatmiser PRT-TS, my wiring is the same.
4 = Blue Wire (Neutral)
1 = Brown Wire (COM)
2 = Black Wire (ON)
3 = Empty terminal (OFF)
The only difference is that I have a Glo Worm 40FF non-condensing boiler, will these thermostats still be compatible using the same 3 to 2 wire principle- isolating neutral?
Thanks
Leon