I am about to replace my old cooker with a Hotpoint SY36 Single Built in Cooker and E6014 Ceramic Hob. At present i have a standard cooker with a single connection to my Cooker Outlet which runs on its own cable to a 32Amp fuse in my Consumer Unit. The booklets say i must connect both cooker and Hob separately so I spoke to a friend (ex electrician) and he says all i need do is disconnect the cable from my existing cooker and wire it to the HOB (its 4mm cable i think thicker than the ring main stuff) and wire the oven to a fused outlet on the ring main. The cooker capacity is 2250-2400W and the Hob Overall Power is 6700W. There is a column in the book that says Fuses Section and the cooker says 16A and the Hob 25A 2.5mm (squared). I am confused about this Fuse Section? My friend says that i should change my 32Amp fuse at the Consumer Unit feeding the Hob with a 25Amp Fuse but i cant see you can get one. Also what fuse must i put in the fused outlet for the cooker. Am i OK with 1.25mm cable from the cooker to the Fused Outlet which connects to the ring main? Just want to be 100% before i do anything. Any input appreciated. Thanks