Cromer Vent 3

[eddie3625]

May sound daft but I'm using Cromer Vent 3 as a breathable membrane between a solid 9" brick wall and a stud wall

My question is this, which way round does it go. I know for a roof the printed side would face up towards the tiles. Is this the same when put against a wall , that is the printed side faces the brick.

Cheers

 

[Notch7]

I'm not sure why you would choose to use a breathable membrane as a vapour barrier.......

 

[eddie3625]

Notch 7 thanks for pointing out. I've reworded post. It's not being used as a vapour barrier.

 

[^woody^]

Printed side faces outward, and maintain a small 10mm or so gap.