dewalt dw707 not cutting straight

[colw1]

Hi I have a dewalt dw707 which is in good condition and not abused but I have noticed the joints don't seem to meet up
when I layed a square against the fence and ran the blade down the square I noticed that it touches at one end but when pushed along the slide it was not touching the square by time it got to the finish
I decided to adjust it as I thought it may have just needed resetting but on inspection there is no adjustments on it , it just clicks in at zero point and that is it no adjustment
please could someone help
thanks col

 

[Burnerman]

I don't know about this particular machine, but normally there is just sufficient adjustment on the table securing screws, often underneath?
My SIP machine has anyway, it needs setting up fairly frequently.
John

 

[joinerjohn]

Page No 10 of the link tells you how to adjust the machine to ensure it's cutting square.

http://i.cr3ation.co.uk/dl/s1/pdf/dewaltdw707manual.pdf