Hi. I have taken low voltage cabinet lights out and a switch isolator . The double switch needs disabling and the wires terminal blocking so I can take the switch off the wall . Below are the pictures . Anyone any advice please ?
It sounds lk you have worked it out for yourself already.
Turn power off, check for dead to make sure you dont get a shock, slacken switch screws & remove switch, insert all 3 brown wires into individual bits of terminal block and tighten screws ensuring nothing can touch live parts, turn power back on.
Put the earth conductors together in an insulated terminal block.
Put the 3 brown ones into 3 seperate insulated terminal blocks,and leave the blues as they are.
I assume the blanking plate will e plastic ?
It sounds lk you have worked it out for yourself already.
Turn power off, check for dead to make sure you dont get a shock, slacken switch screws & remove switch, insert all 3 brown wires into individual bits of terminal block and tighten screws ensuring nothing can touch live parts, turn power back on.
Put the earth conductors together in an insulated terminal block.
Put the 3 brown ones into 3 seperate insulated terminal blocks,and leave the blues as they are.
I assume the blanking plate will e plastic ?
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local