Dishwasher Inlet/Drain problem Miele G977

[Baytree2022]

Hello

I have a Inlet/Drain red light on a Miele G977 plus and it stopped during a wash.
There was water in the bottom tray.
The outlet hose has a small crack (although not sure if that happened as I removed it).

Pump impeller rotates OK. No blockages in filter pit or hose.

Following instructions for fault codes on another forum post, this seems to have a fault at 7 O'clock.

Any ideas what the fault code means or what to look for? It all seems quite tidy underneath.

The label on the door says type HG01 after the G977 PLUS.

Thanks

 

[JohnD]

Water in the bottom tray means it is leaking

Modern dwrs usually have a float switch that turns off the machine when it detects the tray has water in it

If you tip out the water the machine may run again, but you have not mended the leak.

 

[Baytree2022]

Thanks. Yes, the G977 has a float in a housing that sits in the tray.
Any idea where these usually leak from? I can't see any obvious leak marks.