- Joined
- 11 Nov 2017
- Messages
- 20
- Reaction score
- 1
- Country
Hi
Im trying to turn an existing drawer into a filing cabinet using some 8mm steel rods. As can be seen in the picture, the rods are the correct size to do what i need them to do but the issue is I can't work out how to attach them to the drawer sides. The depth of the drawer is too shallow to drill holes to insert the rods into so it will need to be something that can secure the rods to the top of the drawer sides. The drawer sides are 18mm wide.
If there are any fixings you can link me to it would be most appreciated.
Any ideas?
Im trying to turn an existing drawer into a filing cabinet using some 8mm steel rods. As can be seen in the picture, the rods are the correct size to do what i need them to do but the issue is I can't work out how to attach them to the drawer sides. The depth of the drawer is too shallow to drill holes to insert the rods into so it will need to be something that can secure the rods to the top of the drawer sides. The drawer sides are 18mm wide.
If there are any fixings you can link me to it would be most appreciated.
Any ideas?