Do I need 63mm nails for 18mm t&G OSB board ?

The cheapest! For example the Wirox 4.5 x 60 screws are cheaper from Toolstation at £19.24 for 300 - but Torx head screws are always expensive, which is why you rarely see them on tyrade flooring jobe where we use either square drives or PZD heads. Chipboard screws like these 5.0 x 60s are a lot cheaper - you just need to ensure that the screws don't jack the material off the timber when you are screwing down
 
Sponsored Links
The cheapest! For example the Wirox 4.5 x 60 screws are cheaper from Toolstation at £19.24 for 300 - but Torx head screws are always expensive, which is why you rarely see them on tyrade flooring jobe where we use either square drives or PZD heads. Chipboard screws like these 5.0 x 60s are a lot cheaper - you just need to ensure that the screws don't jack the material off the timber when you are screwing down
Awesom - thanks for that advice :)
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top