I'm going to fit wet UFH downstairs to a new build and radiators upstairs. Most of these rooms will be zoned in the house. Because the downstairs bathroom is small, 2.35m x 1.85m, I'm not sure it will provide plenty of heat even with 150mm pipe centres. I'd like to fit a towel rail to the wall so wondering which system it's best taken from, the UFH or the radiator system.
Not keen on electric as it's expensive to run.
Taking from the UFH if possible would means it's running cooler but can be linked to the same zone on the manifold. If it comes off the upstairs rad system, I'd have to fit a TRV and it would come on and off whenever an upstairs zone calls for heat.
Not keen on electric as it's expensive to run.
Taking from the UFH if possible would means it's running cooler but can be linked to the same zone on the manifold. If it comes off the upstairs rad system, I'd have to fit a TRV and it would come on and off whenever an upstairs zone calls for heat.