I have two questions......
We need to raise the garage floor up by an inch or so to be level with the driveway outside. The front of the garage, where the door is, would then be 2 bricks below DPC level, but the back of the garage would only be 100mm below DPC. This is because the existing floor is sloping upwards-
1) - We know that the ground level has to be 150mm (2 bricks) below DPC, but would this apply to an internal concrete garage floor that has no DPM?
2) What material would we use to do this screed or concrete?
Thanks
We need to raise the garage floor up by an inch or so to be level with the driveway outside. The front of the garage, where the door is, would then be 2 bricks below DPC level, but the back of the garage would only be 100mm below DPC. This is because the existing floor is sloping upwards-
1) - We know that the ground level has to be 150mm (2 bricks) below DPC, but would this apply to an internal concrete garage floor that has no DPM?
2) What material would we use to do this screed or concrete?
Thanks