This may be a thick question but its the first time I have met a rad with a drainoff valve. I am assuming that I can drain the water out having closed the taps at each end.
I am wallpapering and have got to a Rad that I need to remove. It has a standard rad valve on one end and a valve with drain off at the bottom.
The question is. To drain the rad do I close both valves by screwing taps down, undo the bleed screw . Then after placing container under drainoff undo end of drain valve.
The type of valve with drain is Cosmos.
Thanks in anticipation of a response.
I am wallpapering and have got to a Rad that I need to remove. It has a standard rad valve on one end and a valve with drain off at the bottom.
The question is. To drain the rad do I close both valves by screwing taps down, undo the bleed screw . Then after placing container under drainoff undo end of drain valve.
The type of valve with drain is Cosmos.
Thanks in anticipation of a response.