Hi Folks
I have just had my old Drayton Tempus Three replaced with a Drayton Lifestyle LP522 but it’s not working as it should.
The CH side is doing nothing the light come on but does not fire the boiler up.
The HW side is controlling both the water and the rads, the problem I have is the radiators are not cutting off with the room thermostat
When the engineer came to replace the old unit he changed the back plate and I am wondering if he got his wires mixed up! I have called him and has said he will come back out when he can (that was a week ago)
My old unit did work before with the thermostat, boiler is a prima c and it’s not a combi (don’t know what it’s called I still have a copper cylinder)
Can anybody offer any advice?
The back plate is now wired like this (there are only five wires)
Yellow & Green - is in the Earth
Black - is in the N
Red – is in the L
Blue - is in 1
2 is empty
Solid Yellow is in 3
4 is empty
I have just had my old Drayton Tempus Three replaced with a Drayton Lifestyle LP522 but it’s not working as it should.
The CH side is doing nothing the light come on but does not fire the boiler up.
The HW side is controlling both the water and the rads, the problem I have is the radiators are not cutting off with the room thermostat
When the engineer came to replace the old unit he changed the back plate and I am wondering if he got his wires mixed up! I have called him and has said he will come back out when he can (that was a week ago)
My old unit did work before with the thermostat, boiler is a prima c and it’s not a combi (don’t know what it’s called I still have a copper cylinder)
Can anybody offer any advice?
The back plate is now wired like this (there are only five wires)
Yellow & Green - is in the Earth
Black - is in the N
Red – is in the L
Blue - is in 1
2 is empty
Solid Yellow is in 3
4 is empty