- Joined
- 17 Sep 2004
- Messages
- 465
- Reaction score
- 10
- Country
Just looking for a bit of reassurance before I get my screwdriver out!
Double-sink unit, and the waste pipes got a knock. Now there is a drip coming from beneath the half-bowl where the waste pipe joins the sink (3rd photo below).
I've tried tightening the screw in the drain inside the bowl itself, and this helped but did not create a completely water-tight seal.
I could keep tightening.... but might this crack/damage anything?
My instinct now is to unscrew, and put in some kind of new washer beneath the sink (I assume there is one) and/or sylicon?
Double-sink unit, and the waste pipes got a knock. Now there is a drip coming from beneath the half-bowl where the waste pipe joins the sink (3rd photo below).
I've tried tightening the screw in the drain inside the bowl itself, and this helped but did not create a completely water-tight seal.
I could keep tightening.... but might this crack/damage anything?
My instinct now is to unscrew, and put in some kind of new washer beneath the sink (I assume there is one) and/or sylicon?