Hi, long shot but wonder of anyone can point me in the right direction.
A voluntary group I'm involved in recently acquired an old (unused for 10 plus years) shop unit to use as a workshop.
The unit is heated by a 30Kw forced air ducting system which we've tried to bring back into commission. The unit is actually in good condition and some new filters and a clean later, it's working (ish!)
The heat output was poor, and a peek inside reveals the issue - the unit has multiple broken open-coil elements.
It looks like a fairly easy fix, bit we're having trouble locating compatible spares, or anything close really. The manufacturer appears to be long gone with no trace on the internet
I've posted some pictures below, and wonder if anyone could point us in the right direction.
Many thanks
https://m.imgur.com/a/9GhG84T
Andrew
A voluntary group I'm involved in recently acquired an old (unused for 10 plus years) shop unit to use as a workshop.
The unit is heated by a 30Kw forced air ducting system which we've tried to bring back into commission. The unit is actually in good condition and some new filters and a clean later, it's working (ish!)
The heat output was poor, and a peek inside reveals the issue - the unit has multiple broken open-coil elements.
It looks like a fairly easy fix, bit we're having trouble locating compatible spares, or anything close really. The manufacturer appears to be long gone with no trace on the internet
I've posted some pictures below, and wonder if anyone could point us in the right direction.
Many thanks
https://m.imgur.com/a/9GhG84T
Andrew