engineered wood

[whyme!]

Is 3mm or above ok as a top layer with 15mm plank.
And could someone point me to somewhere i can read up on laying it.
The other question is Oil or Laquer??
If half the original floor is floor boards and other half screed, what thickness ply should i cover floor with ?

 

[WoodYouLike]

How to lay a wood floor
Oil or lacquer

and at least 6mm ply

 

[whyme!]

you mean 6mm top layer?
If half the original floor is floor boards and other half screed, what thickness ply should i cover floor with ?

 

[WoodYouLike]

what thickness ply should i cover floor with ?

at least 6mm ply.

 

[whyme!]

ahh cheers, misread that. Will floor not end up very high though? and does it need screwing to floor where it can?
Any makes of floor to look out for that are good?
Would the DPM go under ply then lay floor direct to ply?

 

[whyme!]

have been looking at this, in oiled and laquer, is the price so cheap because its russian?
http://www.completelyflooring.co.uk/engineered-oak-1-strip-22mm-lacquered.html

 

[WoodYouLike]

Could be. But I doubt if the picture is of the real product: too neat and no bevels.