I am currently in the process of redecorating and fitting a new kitchen but as i would like to move the sink and add a few more sockets i would like to know if the work i would like doing can be done.
I have two single sockets that are fed by two wires (ring main?) and what looks to be a separate earth wire which i would like blanking of and these wires extending below the worktop before they will route to the right of the boiler. The first socket will be a double under the worktop for appliances, the second will be above the worktop and be for smaller appliances and finally a single socket will be needed up the wall for a cooker hood.
I am presuming that the two wires what looks to be a separate earth core are the ring main so this can be extended from the sockets that i wish to have blanked off, if this is the case the additional sockets will be on the main circuit so they will not be spurs?
I have added a few photos to help, enjoy previous cabinet installers drilling as he almost went through the boiler feed conduit and he did go through the 40A cooker conduit but thankfully not the cable.
I have two single sockets that are fed by two wires (ring main?) and what looks to be a separate earth wire which i would like blanking of and these wires extending below the worktop before they will route to the right of the boiler. The first socket will be a double under the worktop for appliances, the second will be above the worktop and be for smaller appliances and finally a single socket will be needed up the wall for a cooker hood.
I am presuming that the two wires what looks to be a separate earth core are the ring main so this can be extended from the sockets that i wish to have blanked off, if this is the case the additional sockets will be on the main circuit so they will not be spurs?
I have added a few photos to help, enjoy previous cabinet installers drilling as he almost went through the boiler feed conduit and he did go through the 40A cooker conduit but thankfully not the cable.